HealthCraft Invisia 2-in-1 Towel Bar With Integrated Grab Bar

HealthCraft Invisia 2-in-1 Towel Bar With Integrated Grab Bar adds a modern and elegant touch to any bathroom. The unique design disguises the grab bar feature as a luxurious bathroom accessory for hanging the towels. The Towel Bar offers convenience, supporting up to 500lbs (227kgs), without sacrificing the look or feel of the space. With color options that include polished chrome, stainless steel, and bronze, it is easy to find the perfect Towel Bar to compliment any bathroom.

Invisia Towel Bar highlights:

• Elegant Design
• Seamless look and feel
• Multi-contact wall support
• Solid construction and mounting
• Luxurious bathroom accessory

HealthCraft Invisia Towel Bar Features

• Top curved bar supports up to 500lbs + bottom rung holds towel
• 3-point wall connection provides maximum structural support 
• Exceeds ADA 4.26.3 structural strength requirements for grab bars and fasteners 250lbs
• Discreet wall stems with concealed screws makes mounting areas virtually invisible
• Supports up to 500lbs (227kgs) when installed to structural wood backing
• Disguised safety within a bathroom accessory
• Made from durable, rust, resistant stainless steel
• Elegant design with integrated support
• Suitable for use in a wet environment
• Solid construction and mounting
• Available in 16″ and 24″ widths
• Instruction Manual

Installation Instructions Of Towel Bar

• Back off set screws from rail sockets.
• Allow wall stems to freely move in and out of rail sockets
• Peel off label on back of wall stems to expose sticker
• With wall stems inside rail sockets, push the rail against the wall. Ensure level
• Firmly press the rail so stickers on back of wall stems contact wall
• Remove rail carefully so wall stems stay on the wall
• Using wall stems as locating guides, mark the tile with center punch
• Drill pilot holes for fasteners
• Fasten the wall stems to the wall using appropriate fasteners and waterproofing
• Place rail back onto the fastened wall stems
• Secure rail to wall stems by tightening set screws. Inspect hardware regularly, and tighten if required.
   

How it Installs:

• The 16”/41cm has a total length of 20.5″/52.3cm, but installs on 16”/41cm stud spacing.
• The 24”/61cm has a total length of 29”/74cm, but installs on 24”/61cm stud spacing.
   

Installation Warnings:

• Rail must be installed to walls that are structurally sound.
• If desired installation location does not have adequate structure, add wood blocking.
• Do not install if there is no structure for center point.
• Do not install if there is no structure for side points.
• Do not install if there is no structure for outer point.
• Do not install if there is no structure behind walls.
• Do not install if structure behind walls is unknown.
• Do not install into metal studs.
• Do not install in fiberglass / acrylic shower enclosures with insufficient stiffness and strength.
• Rail and bathtub are slippery when wet.
   

Suggested Towel Bar Locations:

• To determine the optimal mounting location, it is recommended to hold the rail in place and walking through the motions of a transfer (sitting, standing, reaching,etc.)
• Recommended rail height 36-48″ / 914-1219mm